E6000+ Glue
E6000+ Glue

Manufacturer's Advice/Information

E6000+  Odourless Glue

E6000 PLUS offers virtually the same performance characteristics you love about E6000 but without the odour! It's formulated using a premium polymer technology and can be used on most any substrate and in just about any application. The waterproof formula and all-weather performance make E6000 PLUS ideal for indoor and outdoor applications.

No odour

Crystal clear

Superb UV resistance

Paintable

Remains flexible after curing

Maintains its permanent bond strength

Washer-dryer safe

Acid-free

How long does E6000 PLUS take to dry?

Allow 24 hours for full cure. Depending on substrates and temperature, maximum bond strength may not be reached for up 72 hours.

Can the cure time be sped up?

Yes, for quick emergency repairs, lightly mist the substrate with moisture prior to applying adhesive. Application on damp and wet surfaces may slightly affect adhesion.

How can E6000 PLUS be cleaned up?

Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.

What temperature is best to apply E6000 PLUS?

Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). Once fully cured, the adhesive can withstand temperatures from -40 to 200 ºF (-40 to 93 ºC) intermittently.

Is E6000 PLUS waterproof, UV resistant and washer/dryer safe?

Yes.

What materials can E6000 PLUS be used on?

Use on all your INDOOR / OUTDOOR DIY or craft projects requiring a permanent bond. EXCELLENT ADHESION TO: Wood, Glass, Fabric, Ceramic, Gems, Metals, Marble, Fiberglass, Concrete, most Plastics, Lexan, Plexiglass & much more!

MANUFACTURER'S INSTRUCTIONS FOR SAFE USE

Follow these step-by-step directions when using E6000 PLUS:

Read directions and test a small area for adhesion before use. The surface should be clean, dry and free of dirt. For best adhesion on smooth, non-porous materials, lightly roughen surface before use. Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). Once fully cured, the adhesive can withstand temperatures from -40 to 200 ºF (-40 to 93 ºC) intermittently.

1. Puncture seal in neck of tube using pointer cap.

2. Apply directly to surfaces to be bonded or repaired. NOTE: For non-porous surfaces, apply adhesive, mate surfaces together, pull apart for 5 minutes, then re-mate surfaces permanently.

3. To close tube properly, remove air in the tube by squeezing product slightly past end of the opening, then tightly recap. Dried product can easily be removed.

4. Allow 24 hours for full cure. Depending on substrates and temperature, maximum bond strength may not be reached for up 72 hours.

5. Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.

Not recommended for use on acrylic, vinyl, foam, polyethylene and polypropylene. Store in a cool, dry place.

E6000+ Glue

Our Recommendations/Advice

E6000 PLUS Craft Glue * NEW FORMULA * NO VENTILATION REQUIRED!

This is the USA manufactured E6000+ rhinestone glue, not a cheap copy from China! This is NOT the E6000 that was banned in the EU and UK due to the harmful contents and hazard warnings - this has been totally reformulated to maintain its excellent properties but without the damaging chemicals and smell!

USE: Bonds gems, sequins, glitter and rhinestones to non porous materials such as glass, metal, converse toes etc. It is a great multi-purpose adhesive and super strong!! Perfect for fixing things to hard surfaces, leather (rough it up first), deep pile fabric such as velvet (this requires patience and practise!), shoes, ornaments, bags, crowns etc. 

The waterproof formula dries crystal clear. The all-weather performance makes E6000 PLUS ideal for indoor and outdoor applications. It's UV resistant and paintable - and remains flexible after curing (24 hours), whilst maintaining it's bond strength. It is also Washer-dryer safe! Bonds gems, sequins, glitter and rhinestones to non-porous materials.

This has quite a "gloopy" consistency and we recommend using a syringe. For larger areas, smear small spaces at a time and apply embellishments in batches.  Leave it a minute to get tacky once applied and do allow the full drying time.

If putting rhinestones onto fabric then choose the costumier's favourite Fabri-Fuse or Gem-Tac .

Apply the glue to the surface and drop the embellishment onto the glue. For glueing tips see our Guide. Note this is NOT suitable glue for acrylic gems; we do not sell acrylic (plastic) stones.

Not recommended for use on acrylic, vinyl, foam, polyethylene and polypropylene. Store in a cool, dry place.

Can be used to apply hotfix items though they are made especially for using a hot fix applicator, an iron or transfer tape.

Price: 
£8.50 - £10.75

Factory pack discount will be applied in shopping cart where applicable.

Available Size:
Size
Unit Price
Total
26.1ml
£8.50
£8.50
56.1ml
£10.75
£10.75